How to operate: This series of products is also called pneumatic needle rust remover. The rust-removing needle bundle can automatically match according to the actual conditions of the working surface and is driven by a compressed air source. It is especially suitable for rapid and efficient scale removal, slag removal, and weld cleaning at narrow angles, uneven surfaces, and deep holes. It has the characteristics of small size, reliable quality, simple operation, convenient maintenance, and long service life. It is widely used in shipbuilding and construction. industry, metal casting, car beauty, DIY and other fields.
Usage scenarios:
1. Remove slag and spatter during welding.
2. Perform shot peening after welding.
3. Remove rust, paint, and casting sand from irregular metal surfaces.
4. Peel off the adhered concrete to clean the brick surface and stone structure.
5. This tool is used to operate in discrete operating areas where no other tool is feasible: in narrow, difficult-to-repair areas, extremely irregular surfaces, and grooves, cracks and other exteriors. or surfaces without containers, etc.
How to use:
1. Do not use this tool without load, otherwise it will damage the tool, causing the needle to break and fly out, causing an accident.
2. Please be sure to wear protective equipment before using this tool, such as respirators, goggles, anti-vibration gloves, earplugs, etc.
3. Using high or low compressed air will cause the tool life to be shortened. The compressed air pressure range is 0.6 to 0.8MPA. Aim at the target and turn on the switch to operate.
4. After use, please cut off the compressed air and add 1ML special lubricant to the tool for maintenance, which can effectively extend the service life of the tool.
5. After use, please check the wear of various parts of this tool and replace worn parts in time.