Method ofoperation:
This series of products also known aspneumatic needle scalers rust removal machine. The derusting needle bundle can automatically cooperate according to the actual situation of the working face and is driven by compressed gas source. It is especially suitable for fast and efficient descaling, slag cleaning and weld clean-ing of narrow corners, uneven surfaces and deep holes, with small volume, reliable quality, simple operation, easy maintenance and long service life, widely used in shipbuilding, construction, metalcasting, automotive beauty, DIY and other fields.
Usage scenario:
1.Remove slag and spatter from welding.
2.Perform shot peening after welding.
3.Remove rust, paint, cast sand from irregu-lar metal surface.
4.Peel off adhered concrete Clean brick sur-faces and stone structures.
5.The tool is used for operations in the dissi-cuit-to-operate areas where no other tool would be feasible: in narrow diffi-cult-to-resch areas extremely irregular sur-faces, and grooves, cracks and other exteri-or surfaces without containers etc.
How to use it:
1. Do not use this tool on empty loads, asthis can damage it and cause a needle to break and fly out, causing an accident.
2. Be sure to wear protective gear such as respirators, goggles, vibration-resistant gloves, earplugs, etc. before using this tool.
3. Use of high or low Compressed air can result in a reduced tool life, Compressed air with a pressure range of 0.6 to 0.8 MPA, aim for the target, and turn the switch on to operate.
4. After use, please cut off the Com-pressed air and ADD 1 ML special lubricant to the tool for maintenance, which will effectively extend the tool life.
5. After use, please check the wear of the parts of this tool, and replace the worn parts in time.