Application:
For planing concrete.
Removes stone roofing material, white lines, ice, dirt and grease.
Treat the floor before painting.
Remove paint and coatings from steel and concrete surfaces.
Medium to large area rust removal for main decks and hatch covers of ships, cruise ships, etc.
Suitable for removing scalers and surface paint from ship deck, the working depth can be ajustable by Handle Roller.
Maintainance:
1. Before use check the cable, switch not loose or damage
2. Keep the storage environment dry and air move.
Attention:
1. Make sure the same voltage electric source with motor.
2. The Electric Motor is not water proof, prohibit getting wet of motor.
3. Before using, make sure the working parts just touch the working surface, the next step turn the Handle Roller left 1-1.5 circle(this equal the working parts working depth is 2-2.5mm).
4. Always keep the working depth around 2mm and working speed around 5-10m per minute.
5. Stop work immediately If find the machine vibration severity, and turm right the Handie Roller to adjust higher the working depth.
6. Cutters reduce 5mm and Blade reduce s8mm, Shaft reduce 1.5mm should change new one.